Line Voltage: 0 (V) SPA3102

lass

SPA3102 is cabled up correctly and using these the regional specific settings for the UK; http://www.provu.co.uk/pdf/sipura/sipura_u...al_settings.pdf

FXO1 and FXS1 register ok with Axon, but SPA3102 Line Voltage = 0 (V)

Can anyone help please? What factors determine SPA3102's line voltage value? What voltage value should i see?

Thanks

david_webb

lass wrote:

SPA3102 is cabled up correctly and using these the regional specific settings for the UK; http://www.provu.co.uk/pdf/sipura/sipura_u...al_settings.pdf

FXO1 and FXS1 register ok with Axon, but SPA3102 Line Voltage = 0 (V)

Can anyone help please? What factors determine SPA3102's line voltage value? What voltage value should i see?

Thanks

Hi I have A SPA 3000 and my voltage is about 45 to 52 volts and about 7 volts when off hook

If it is not reading voltage then I would be sure there is a wiring problem maybe the wrong lead or jackpoint setup

I think the pins are the two center pins of the rj11 phone plug the connects to the spa.

Try testing them with a meter and see if there is voltage.