Trying to configure 2 SPA3102

KorporateFox

I figure this may be a port problem so I changed them but no effect. The units are set:

SPA3102 Unit one SPA3102 Unit Two

Line 1 Registered=Yes Line 1 Registered=Yes

Line 1 Port = 5070 Line 1 Port = 5072

UserID=FXS1 UserID=FXS2

PSTN Port=5060 PSTN Port=5061

PSTN Registered=Yes PSTN Registered=Yes

UserID=FXO1 UserID=FXO2

Dial Plan (S0<:FXO1&gt😉 Dial Plan (S0<:FXO2&gt😉

Axon sees and registers Extension FXS2

In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061

The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected.

The second unit just keeps on ringing.

Any clues anyone ?

KorporateFox

KorporateFox wrote:

I figure this may be a port problem so I changed them but no effect. The units are set:

SPA3102 Unit one SPA3102 Unit Two

Line 1 Registered=Yes Line 1 Registered=Yes

Line 1 Port = 5070 Line 1 Port = 5072

UserID=FXS1 UserID=FXS2

PSTN Port=5060 PSTN Port=5061

PSTN Registered=Yes PSTN Registered=Yes

UserID=FXO1 UserID=FXO2

Dial Plan (S0<:FXO1&gt😉 Dial Plan (S0<:FXO2&gt😉

Axon sees and registers Extension FXS2

In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061

The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected.

The second unit just keeps on ringing.

Any clues anyone ?

Whoops - Sorray about that. The formatting went to crap! I will try again.

I figure this may be a port problem so I changed them but no effect. The units are set:

SPA3102 Unit one. This works and inbound calls answer normally

Line 1 Registered=Yes

Line 1 Port = 5070

UserID=FXS1

PSTN Port=5060

PSTN Registered=Yes

UserID=FXO1

Dial Plan (S0<:FXO1&gt😉

SPA3102 Unit Two, This doesn't work. Outside calls just ring endlessly. No entry Axon logs

Line 1 Registered=Yes

Line 1 Port = 5072

UserID=FXS2

PSTN Port=5061

PSTN Registered=Yes

UserID=FXO2

Dial Plan (S0<:FXO2&gt😉

Axon sees and registers Extension FXS2

In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061

The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected.

The second unit just keeps on ringing.

Any clues anyone ?

bda

KorporateFox wrote:

Whoops - Sorray about that. The formatting went to crap! I will try again.

I figure this may be a port problem so I changed them but no effect. The units are set:

SPA3102 Unit one. This works and inbound calls answer normally

Line 1 Registered=Yes

Line 1 Port = 5070

UserID=FXS1

PSTN Port=5060

PSTN Registered=Yes

UserID=FXO1

Dial Plan (S0<:FXO1&gt😉

SPA3102 Unit Two, This doesn't work. Outside calls just ring endlessly. No entry Axon logs

Line 1 Registered=Yes

Line 1 Port = 5072

UserID=FXS2

PSTN Port=5061

PSTN Registered=Yes

UserID=FXO2

Dial Plan (S0<:FXO2&gt😉

Axon sees and registers Extension FXS2

In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061

The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected.

The second unit just keeps on ringing.

Any clues anyone ?

Hello,

The Line 1 port should be 5070 (assuming that is the port configured in your axon server)

The proxy should point to 10.110.30.253:5060 (not 5061, because the axon server is expecting in port 5060)

The first one is working but is better to change the PSTN port to 5061.

Hope it helps

Bruno Abreu