DFritz wrote:
What I found on the internet didn't show that modem as TAPI compliant. It may be but it didn't say anything about that in the specs. That's the first thing to check.
Don
I search a fair bit, and what I found was that I is not 100%TAPI compliant, I found some "alternate" software would work quite well, but all ran into problems. When testing for compliance/ support I queried using the AT commands. The modem does not support the featires required, in particular the AT#CLS command is not supported
The is the diagnostic output from may machine running the lattest driver from dell.
ATQ0V1E0 - OK
AT+GMM - +GMM: Conexant D850 56K V.9x DFVc Modem
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI: 9
AT+GCI=? - +GCI: (00,01,02,03,04,05,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,13,14,15,16,19,1A,1B,1
C,1D,1E,1F,20,21,22,23,24,25,26,27,28,29,2A,2B,2C,2D,2E,2F,30,31,32,33,34,35,36,3
7,38,39,3A,3B,3C,3D,3E,40,41,42,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,5
4,55,56,57,58,59,5A,5B,5C,5E,5F,60,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,7
0,71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8
B,8C,8D,8E,8F,90,92,93,94,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A
8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C1,C2,C3,C
4,C5,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E
0,E1,E2,E3,E4,E5,E6,E7,E8,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F7,F8,F9,FA,FB,FC,FE)
ATI1 - 255
ATI2 - OK
ATI3 - SoftK56V_B2.1_V7.06.00.50
ATI4 - Conexant D850 56K V.9x DFVc Modem
ATI5 - 009
ATI6 - SoftK56
CModem Version 12
Rksample Version 342
ATI7 - 255
Apparently there are some 3rd party drivers arround, but I found an alternate method to acheive what I needed so I didn't persure it any further.
If I need to, I will just purchase one of the "supported/known to work modems" as they are not very expensive, and I was spending way to much time on the problem.
