Hello,
I have just configured 2 SPA3102 in our network.
I used the setup guide of axon instead of the manual of the pinned topic. url: http://www.nch.com.au/hardware/setup/fxo.html
I have the two units working just fine. Configuring like this, I don't need a extension to ring to the group, the configuration of the external line in AXON is set to group 701.
The things I have different from the setup guide is:
In the SPA3102 Web Configuration:
In the guide they say to Set 'NAT Keep Alive Enable' to yes and blank out the 'NAT Keep Alive Msg' field. I din´t it is not necessary if you are working with fixed IP address.
In the guide they say to Set 'PSTN Answer Delay' to 2. In my case I have to put 4 (For CID to appear)
In the guide they say to Set 'Detect PSTN Long Silence:' to yes , and set 'Detect VoIP Long Silence:' to yes. I have both set to No.
One other thing is, you must set to No the PSTN Ring Thru Line 1. This let´s the axon manage the incoming call and the phone connect in the FXS port only rings if you set in axon configuration.
Hope it helped.
Bruno Abreu
Peter D. wrote:
Hello Folks,
I just have tried to configure and SPA3102 FXO adaptor folowing the manual in the pinned toppic.
I experience the following issues:
On incomming Calls:
If i set in the FXO adaptop the option "PSTN CID For VOIP CID" to yes i get the following message in the Axon console
"Unable to to find anny line with the ID '701" or extensions with the ID'0498109701' (where 0498109701 is the CID from the calling party).
When i set 'PSTN CID For VOIP CID' to no i can recieve incomming calls (withoud CID)
On outgoin calls
When i create and external line as described in manual i see the following messag in the the Axon console
'register atempting for SIP :user@192.168.5.106:5061 failed'
'501 not implementet'
Is there annyboddy who can help me with this.
Regard,
Peter Discart
Peter.discart@econoweb.eu