SPA3000 / SPA3102 GUIDE

asmith

Adam smith wrote:

Thanks Anuj

I'll have a play around with it this evening! I did have another problem but can't remember it anymore, so it couldnt have been that big an issue

Adam

Sorry to be a pain again but could you provide me with some instructions on how to do this?

Thankyou

Adam

shmuelie

I do not have the option "None" in the e "Incoming Calls Ring On Extension or Group"

According to the manual I need to Set the "Incoming Calls Ring On Extension or Group" to None

pythonpoole

I realize this is a very late reply, but I should still answer.

It shouldn't matter what extension you pick from the list, in the previous version you could select none, but I guess now you are forced to pick one. Regardless of what extension you choose, it should ring on the extension specified in the FXO adapter configuration.

bellalamb

Just install SPA3102

All worked fine, except for Caller ID - I was just getting FXO1 as the caller ID

Tried to enable PSTN CID for VOIP (step 22) and was getting the error on Axon - cannot find line with ID '300' or extension with ID 'xxxxxxxx' -- 300 is my incoming group - xxxxxxx was the calling number

I solved it by adding another external line called 300, ringing on 300 - with username and password of 300 and "Other device will contact us (eg. FXO, UpLink, etc...)" selected

now I get full Caller ID - on talk express and Grandstream 2000 I get

FXO1

'calling number '

which is quite useful as it shows the call has come in on that line!

Thought this might be useful for any with problems on caller id!

My setup

1 FXO line

8 VOIP Lines

3 Grandstream 2000

7 Grandstream BT200 (3 in other countries)

6 Talk Express

IVM

Uplink to Skype

d1rage5

Has anyone gotten the CID to work from the FXO?

all i get from the pstn is FXO1 call. if i login into the spa 3102 you can see the last caller info but it does not pass that info to axon that should pass that info the the ext dialed?

logs from axon and ivm only shows (call FXO1)

bellalamb

dan wrote:

Has anyone gotten the CID to work from the FXO?

all i get from the pstn is FXO1 call. if i login into the spa 3102 you can see the last caller info but it does not pass that info to axon that should pass that info the the ext dialed?

logs from axon and ivm only shows (call FXO1)

yes - see post above

the '300' is whatever your ring group is -- usually 701 on Axon -- just that I use '300'

d1rage5

didnt have the issue with the not answering for the error you had but i created the 198 external line to ring on group 198 and it worked dont know why but it did. I hopes its not a bug and the next version its fixed and it breaks the current setup. well see in the next test inviroment. :rolleyes:

myasterisk

I am using AsteriskNow, I followed the instruction but I still unable to register..

I met the following on /var/log/asterisk/message

Host '172.16.1.169' does not implement 'REGISTER'

please help

Thanks & Regards

Winanjaya

pythonpoole

Well I have no idea how to set-up the SPA adapter with Asterisk, I believe it is quite different to Axon (what this set-up guide is for). You can try the Voxilla forums, they have quite a few sample config guides for Asterisk and the SPA3102.

P.S. I should point out that when you use this Guide with Axon, you get pretty much the same error you got with Asterisk.. the only difference is with Axon it still works even with the error.. so I don't know, is it not working at all with your Asterisk box? If there is a way to accept incoming calls without registering, perhaps try that?

« Previous Page