Infinity foot pedal w/ Express Scribe

dickenl

I purchased an Infinity USB foot pedal (model IN-DVIUSB) off of ebay and can't get it to work with Express Scribe. Keep getting an error message that the VEC foot pedal USB is not plugged in, it is. The computer seems to recognize the usb for the foot pedal is plugged in because I get a message indicating new hardware has been detected. Any suggestions?

aob

dickenl wrote:

I purchased an Infinity USB foot pedal (model IN-DVIUSB) off of ebay and can't get it to work with Express Scribe. Keep getting an error message that the VEC foot pedal USB is not plugged in, it is. The computer seems to recognize the usb for the foot pedal is plugged in because I get a message indicating new hardware has been detected. Any suggestions?

<{POST_SNAPBACK}>

I had a similar problem, in not getting my Infinity pedal to work. Fortunately, I had a Sanyo 3-pedal foot pedal availabe. Plugged it in and it worked right away.

I asked the same question you are asking and got very long-winded answers, which I did not understand. The bottom line is, my Infinity 3-pedal pedal will not work and my Sanyo 3-pedal pedal will work with Express Scribe.

gsimmons03

aob wrote:

I had a similar problem, in not getting my Infinity pedal to work. Fortunately, I had a Sanyo 3-pedal foot pedal availabe. Plugged it in and it worked right away.

I asked the same question you are asking and got very long-winded answers, which I did not understand. The bottom line is, my Infinity 3-pedal pedal will not work and my Sanyo 3-pedal pedal will work with Express Scribe.

I just downloaded Express Scribe and have been working with the hot keys, which I don't like. You're the second person who's complained about the Infinity USB foot pedal. Which Sanyo foot pedal did you get? :huh:

gsimmons03

I got the Infinity foot pedal to work. It was confusing at first. You have to download the driver (available at the NCH site) and make sure it get installed into the ExpressScribe folder. Plug into your USB. It will be detected, but then if you go to the "Settings" area, you will be prompted to "program" your pedal by pressing on the 3 functions. Mine is working great now!

cujo

gail wrote:

I got the Infinity foot pedal to work. It was confusing at first. You have to download the driver (available at the NCH site) and make sure it get installed into the ExpressScribe folder. Plug into your USB. It will be detected, but then if you go to the "Settings" area, you will be prompted to "program" your pedal by pressing on the 3 functions. Mine is working great now!

Where abouts on the site did you find the drivers? I can't seem to find them anymore. Thx.

[deleted]

You can get them from http://www.nch.com.au/components/ under the Vecusb for 'Infinity' USB Foot Pedals heading.

kss

nchto wrote:

You can get them from http://www.nch.com.au/components/ under the Vecusb for 'Infinity' USB Foot Pedals heading.

I downloaded the driver and it still says it cannot detect it. I also need this to work with Dragon MT, anyone know anything about that? I'm going bonkers. :angry:

rcheezum

nchto wrote:

You can get them from http://www.nch.com.au/components/ under the Vecusb for 'Infinity' USB Foot Pedals heading.

Thanks for the posts. I'm still having trouble. I downloaded the driver, but couldn't put it in the Expres Scribe folder because I didn't have "permission." (It's MY computer!) I'm still getting the same error message about no pedal being detected when I try and set up the foot pedal through the wizard. Any ideas?????

Dani33

becheez wrote:

Thanks for the posts. I'm still having trouble. I downloaded the driver, but couldn't put it in the Expres Scribe folder because I didn't have "permission." (It's MY computer!) I'm still getting the same error message about no pedal being detected when I try and set up the foot pedal through the wizard. Any ideas?????

Are you trying every com port selection during the wizard to make sure you're choosing the right one? I and just about everyone I know uses the Infinity USB and we've not had this problem.

kac125855_yahoo.com

Please help me. I have been using my Infinity USB foot pedal with Express Scribe with no problem for years. All of a sudden it is not working properly. The pedals do not work. Playback does not stop or rewind when I take my foot off the pedal. The screen says my foot pedal is OK. I have rebooted my computer, uninstalled and installed my Express Scribe, configured my foot pedal several times. Again, the indicator says it is installed and working, but it is not. Sometimes it works for a about ten minutes, but then it starts the trouble again. Please help.