Feathering setting not retained in saved project in v 11.08

borate

Try another PC, if available. And update the driver if necessary.

LaRa

hi Borate! Could you please you let me know when the 11.26 release version is out? Would like to update VP as soon as possible so that I can take action without delay if I have a problem registering it with my current key.

borate

It's officially released...

64-bit https://www.nchsoftware.com/download/videopadsetup64.exe

32-bit https://www.nchsoftware.com/videopad/vppsetup.exe

LaRa

oh! Thank you so much!!

LaRa

But it still says beta on top right

https://drive.google.com/file/d/1tJHNP3MFY_aZoaxltd0bcYGWruXAGjbr/view?usp=sharing

borate

True. Don't let it bother you - that's the released version.

LaRa

ok then....er...I can't remember if I have used the key to register it. Does it say Videopad professional V so-so at the bottom when you have registered as opposed to when not registered?

borate

Text at the top indicates the licensing status. If not licensed, chances are it will prompt to either purchase or confirm home use each time it's launched.

LaRa

yes! I just noticed it...Thanks again

LaRa

hi Borate! Just check this out. I think they fixed one bug but introduced another one.

After masking, when I change the opacity value in effects (in my project from 0 to 52), the value does change as set when I move the slider in the effects window but it is not reflected in the preview. If my memory can be trusted, I think this was working fine in the earlier version

https://drive.google.com/drive/folders/1oGTJt6Xpo-Qxu8E8iRYHG29b2lOW2Cny

borate

PV reflects the change here, Use the dual window mode, to see the changes in the sequence window. Click the TRANSPARENCY blue bar in effects if necessary.

borate

Seems to be working fine...

LaRa

Not working on my PC

When opacity is 0

https://drive.google.com/file/d/15UfCt-ZmzsvR0IngRE10ZHzkph8Tikw-/view?usp=sharing

when opacity is 52

https://drive.google.com/file/d/1S_cNyltZQY_0-HXUNtJsIPtdYL3dvLqt/view?usp=sharing

Even though under the transparency bar the value changes from 0 to 52 when you move the red cursor line in the effects animation window, in terms of visible effect, the value of 0 remains unchanged from start to finish.

Let me try to explain what I was trying to do. I have used a still and set the duration to 10 seconds.

I have applied a rectangular mask (with Mask inside unchecked, and a high feathering value)

Then I applied transparency which I wanted changing from 0 to 52 over the 10 second duration (key frames being the first frame and the last frame).

Basically, the value of transparency you set in the first key frame remains unchanged and the rest of the keyframes settings are not reflected.

If you are able to do it, can you please share the final video?

Sorry for bombarding you with messages...This is not working in v11.22 either. So my memory can't be trusted. https://content.invisioncic.com/r33241/emoticons/default\_smile.png

borate

You have stumbled upon an old previously undiscovered bug. Here's a workaround. The steps...

1. Place the bird clip on track one.

2. Keyframe the TRANSPARENCY effect to begin at zero and end at 52.

3. Overlay the same clip just above on track two.

4. Create a mask, position it, UNcheck the "Mask inside" box

5. Add the TRANSPARENCY effect and set opacity to zero.

Stay tuned to this thread for word of the fix. If you run into other issues please begin a new thread.

LaRa

Brilliant!! Thanks so much for the genius workaround! Can't appreciate enough the promptness of response.

LaRa

hi Borate! I just received a fresh registration code for VP. Thanks for all the help!

borate

The effect is working correctly in the current beta release.

Untitled.mp4

LaRa

Is the release version already out? The nch software page didn't have any 11.28 even half an hour ago. Please give me the link if 11.28 release is available.

borate

Try this, with the usual beta caveats..

LaRa

It says 11.29 beta. Could you explain what these beta caveats are?

Also, how come you got to know of its release before it even appeared on the main VP s/w page?

Another question I have is if the new registration key will work when the actual version comes out (Am I wrong to assume that it is better to have the actual version than the beta version?)

« Previous Page Next Page »