Change POV / Start Orientation on 360 Video

LenseOnLife

Hi,

I've taken some videos with Ricoh Theta V and being a newbie I pointed the camera to the back rather than the front. This means when teh video is viewed, the viewer has to look backwards to see what is in front 🙁

Is it possible, in VideoPad, to change the start POV - basically rotate the video by 180 degrees horizontally?

Hope someone out there has had a similar newbie error and found a simple solution

Oliver

borate

If you can share a very short file please upload it per instructions in the "Tips for getting help..." post near the top of this forum. Someone will check it out.

LenseOnLife

Hi, the clips have vulnerable adults so can't upload. I'll try and get the camera later during the weekend and do a short 1 minute clip and upload.

thanks

LenseOnLife

Hi,

Got it sorted. Had been experimenting with the 360 viewer and the wrap - but wrong rabbit hole.

Procedure:

Put clip on Video Track 1
Add the Move effect and set the horizontal value to 50
Put Clip on Video Track 2 (same clip as on Track 1)
Add the Move effect and set the horizontal value to -50

That seems to be it

Oliver