Hello. I really like the FFT analysis in Wavepad, but would like to see higher resolution in the X axis. When zoomed-in to highest resoultion, it still isn't enough to plot exact frequency of specific peaks. It appears the software is not correlating the measurement correctly- as is listed in Hz, and "note" in upper right corner, when cursor is placed on the frequency peak. Looking at the div lines these frequencies displayed are not matchng with the position on X axis, within each division (I am not using the logatithmic scale, to gain highest resolution).
Are there plans to increase this funcitonaility, or can you confirm that the peaks as shown in the graph are plotting exactly to the graph (example 50% between divs = 50% of the value)?
Lastly, the extreme low frequencies (under 100 Hz) need more separation. I am trying to identify fundamental notes below 60 Hz or so, and this software is bunching everything up in that area...
So, it's a long question, but the bottom line is I NEED another 1 - 2 levels of zoom function, at least on the X axis...., and the frequency listed in the upper right corner should be gapless (1 Hz precision) when moving cursor along X axis, and displaying that value. There are big gaps now.
Please advise.